Assembling Bed Rails

Place an insert in each of the legs followed by the casters or glides.

Assembling bed rails. Attach the Side Rails to the Headboard. Dont completely tighten the screws. Assemble the first 3 of these clamp screws B on the underside of the side rail tube of one length of the bed.

Place the round plate with the strap on th opposite side of the bed rail and mount to the outer edge of the box springframe. There are a total of 6 clamp screws provided for assembling the bed. Before you start the assembly you need the right frame.

Release the 2 round knobs from the locked position to collapse the rail. Height Adjustable Hand Bed Rail with Security Strap Hand Bed Rail Assembly After laying all of the pieces out use the picture below as your guide. May be lowered down and out of the way for patient transfers or repositioning.

After the bed frame has been attached to the. Hold the end post of the bed upright with your nondominant hand while guiding the side rail with your other hand. Line up the premade holes in the side rail and the end post with one another so you can easily feed the bolt through them.

Fold the support rail out of the way when not in use or while making your bed. Remember to always readjust the slider whenever you reposition the bed rail. For every slat a piece of wood that serves as additional support at the bottom of the bed drill two holes on each side of the slat and the corresponding side rail which should have an inner bar to lay upon.

Turn the rails so that the hooks face down and then insert one end of one rail into the slot on the leg of the headboard -- the bottom support of the rail should face toward the center of the bed. Ensure to adjust the slider to fit snuggly against the base of the bed. Make sure all joints are fully inserted and tighten all 3 clamp screws securely using supplied Allen key.