Bed To Chair Transfer Procedure
Explain what you are going to do.
Bed to chair transfer procedure. Transfers From Bed to Wheelchair Using Transfer Belt. PROCEDURE FOR DEMONSTRATING A ONE PERSON PIVOT TRANSFER FROM BED TO A CHAIR OR WHEELCHAIR. Ensure brakes of the chair bed trolley that the patient is being lifted from are locked.
Count to three and slowly stand up. Preferred methods are in green increased risk methods in amber which should only be used if it is not reasonably practicable to change to a green method and high risk. The wheels of the chair should be locked.
Reposition lifter if required and lower to appropriate device. It has practical tools and templates to assess and manage the injury risk of patient transfer including. Using antiseptic soap and lukewarm water wash your hands properly.
At the same time the patient should place their hands by their sides and help. Lock brakes of bed. To perform a true pivot transfer the two surfaces should be adjacent to each other so that no steps need to be taken.
Position the wheelchair directly next to the surface bed toilet tub bench car sofa etc. If a wheelchair is used make sure to lock its brake and fold the foot rests as soon as you position it near the bed. The steps show how to perform the task when the patient or client can help and when using equipment like electric sling hoists.
If they are on a bed raise it to an acceptable height so you can roll and insert the sling under them. Pull bed sheet down to the foot end of the bed. This health and safety solution describes ways to reduce those risks.

